USRobotics NETServer/16 Manuale Utente Scaricare il pdf (Pagina 43)

IP Terminal Server Setup 4-1

Chapter 4

IP Terminal Server Setup

If you have workstations or terminals at a remote site that

require access to a host on the local network, you can configure

the NETServer to function as a terminal server.

Terminal or Workstation Setup

A. The remote user should get the following information from

the NETServer’s system administrator:

• The user name and password that he or she will use.

• The telephone number of the NETServer the user must

dial into.

• If the terminal or workstation user will be able to choose

which host he or she will log into for a given session, the

IP address or name of each possible host must also be

known.

B. The dial in workstation or terminal should be configured for

the following communications parameters:

• 8 bits, No parity, and 1 stop bit

• Hardware (RTS/CTS) flow control

• Normal Carrier Detect

• Hang up and reset when DTR drops

Note that although these settings are the defaults, you can

change the NETServer’s communications parameters if you

want to. See Port Configuration, Serial Communications

Parameters in Chapter 10 and your modem reference

material for more information.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 283 284

Nessun commento

USRobotics NETServer/16 Manuale Utente Pagina 43